Market

Top 6 Jack Stands to buy for 2023

Jack stands are a necessary investment if you ever need to perform maintenance on your car that involves lifting it off the ground. No justifications are acceptable because your automobile should never be securely raised using just a floor jack or scissor jack. Without jack stands, you run the risk of suffering catastrophic injuries or possibly losing your life.

You can also read: 6 Best 32 Inch Monitors to Buy for 2023

The purpose of floor jacks and scissor jacks is to elevate an automobile; they are not intended to support it for an extended period of time. They can fail, and they have, with tragic tales to go along with such incidents. Jack stands are crucial for this reason, especially considering how reasonably priced they are.

  • BIG RED T43202 Torin Steel Jack StandsBest overall and Best price

  • Southwire MJ-707 Maxis Jax Cable Spool Jack StandsBest expensive

  • Pro-LifT T-6903D Double Pin Jack Stands

  • Omega 32225B Black Heavy Duty Jack Stand

  • Performance Tool W41023 Ratchet Style Jack Stand¬†

  • Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack and stand

A jack stand shouldn’t be avoided for any reason, but finding one can be challenging. There are many options available, so it’s normal if you’re finding it difficult to decide since they are crucial to your safety.

The greatest jack stands are made to safely lift your automobile off the ground so you won’t need to use a floor jack. You set the jack stands down and gradually lower the floor jack onto the jack stands when your automobile has been raised to the desired height. The jack stands can then be checked to ensure that they are stable and won’t move while you work on your car.

Determine the weight of your car by consulting the owner’s manual or online before purchasing jack stands. By doing this, you may determine the jack stands’ capability and ensure that the weight of your car will be supported by them safely.

Top 6 Jack Stands to buy

You can find the Top 6 Jack Stands to buy here:

1. BIG RED T43202 Torin Steel Jack Stands

Although we believe that safety can never truly be priced, we also recognize that not everyone wants to spend hundreds of dollars on jack stands. In light of this, our Editor’s Pick, which provides greater peace of mind than a typical pair of jack stands, is a pair of double locking jack stands. There’s a fair possibility that if you’ve ever been to a mechanic shop, you’ve seen some bright red jack stands laying around on the floor. Even more likely are these jack stands right here, which came from Torin.

Since 1968, the business has produced goods with a focus on car maintenance and repair. This recommendation is available in two-, three-, and six-ton capacities and is well recognized for its floor jacks and jack stands. Most vehicle owners should be fine with the three-ton capacity set, but if you have a heavier vehicle, make sure to get the six-ton option.

These jack stands include a big surface area on the saddle for greater contact with your car and a lifting range of 11-1/4 inches to 16-3/4 inches. For durability, they are built from heavy-duty steel and industrial welded. Safety is increased by the replaceable locking support pin, albeit at a cost.

If you don’t like the locking pin, Torin also sells conventional jack stands that aren’t double locking and are a little less expensive.

The sawtooth-shaped, multi-position, forged iron ratchet allows you to swiftly and simply change the height before locking it in place. These jack stands come with a limited one-year manufacturer guarantee and exceed ASME safety regulations.

Pros:

  • Made up of high-quality steel
  • It can lift from 11 to 16 inches.

Cons:

  • Limited height range

2. Southwire MJ-707 Maxis Jax Cable Spool Jack Stands

With the Southwire MJ-707 Maxis Jax Cable Spool Jack Supports, reels of wire can be swiftly set up and lifted safely and effectively without the inconvenience of traditional reel stands.

Each pair can lift up to 3,000 lbs. of wire reels. Additionally, many steel rollers make it simple for one person to roll off heavy wire, and the max lever enables one person to easily raise wire spools off the ground, reducing the amount of labor often required to do this task.

It disassembles into a little tool that can be stored, and its sturdy jaw clamps onto the axle to keep the wire reels in place and prevent them from falling over. The axle can be made out of either a 1-1/2″ or 2″ rigid pipe.

This model can be used as both a motorcycle jack stand and a car jack stand.

Pros:

  • Versatile
  • Flexible
  • Compact size

Cons:

  • Can’t replace a quality floor jack
  • more parts that can be broken

3. Pro-LifT T-6903D Double Pin Jack Stands

Pro-Lift, a branch of Shinn Fu Company of America, Inc., makes this suggestion (SFA). With a 100,000 square foot warehouse where it also tests its goods, SFA has been a top distributor of hydraulic lift equipment in the US and Canada for more than 40 years. Although these jack stands are produced in other countries, SFA uses ISO-9000 companies to provide a high-quality item that complies with industry standards.

These double locking jack stands can support three tons and are made of durable stamped steel. They contain a cast ductile iron ratchet bar for adjustment, and once you have them firmly installed underneath your car, the release handle locks into place. The ratchet bar is secured in place by the attached pin lock, which also offers additional support.

These jack stands contain counter-weighted pawls to avoid unintentional disengagement and are always to be used in pairs. They adhere to or beyond ANSI/PALD requirements.

Pros:

  • Stamped steel construction
  • cast ductile iron ratchet bar
  • pin lock provides extra safety

Cons:

  • finish chips off easily

4. Omega 32225B Black Heavy Duty Jack Stand

With a 22-ton capacity, this Omega Black choice should be at the top of your list if you require a pair of heavy duty jack stands (combined). These stands offer an adjustable height range of 13-1/3 inches to 19-2/3 inches and have solid welded steel construction with heavy gauge steel frame to prevent twisting. Once you’ve adjusted the height appropriately, the huge retaining pins lock them in place while the saddle up top aids in firmly supporting the greater load.

For individuals who need the weight capacity and are working on considerably heavier cars, this is the best choice. While the majority of our suggestions are adequate for the ordinary car, we are well aware that many of you drive huge SUVs and heavy-duty pickup trucks.

Pros:

  • Heavy duty construction
  • 22-ton capacity
  • large holding pins
  • heavy gauge steel frame

Cons:

  • Thin saddles

5. Performance Tool W41023 Ratchet Style Jack Stand 

Since there isn’t much engineering involved with jack stands that could make one better than another, many of our suggestions are beginning to resemble one another. Therefore, it’s crucial to choose a high-quality item from a respected company so you can be confident it will work once you’ve crawled underneath your car. Wilmar Corporation, established in 1971, is the organization behind the Performance Tool concept. It is a prominent professional tool distributor in North America.

The company offers jack stands with capacities of two, three, and six tons, with double locking options available for the two and three tons. Select your car in accordance with its weight, and pay close attention to the lifting range. The 10-3/8 inch to 16-3/8 inch range for the two-ton jack stands and the 11-1/4 inch to 16-3/4 inch range for the three-ton option. The six-ton jack stands raise from 15-1/2 inches to 23-1/2 inches if you have a bigger car.

Whichever type you select, you’ll get sturdy steel-framed jack stands with a broad base for stability. They are typical ratchet-style jack stands with an easy-to-use locking mechanism after you have reached the required height.

Pros:

  • heavy duty steel construction
  • variety of weight capacities to choose from,
  • double locking options

Cons:

  • Paint finish poor quality

6. Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack and stand

This Powerbuilt all-in-one machine is a good choice if you’re seeking for convenience. This Unijack, which is available with two or three tons of lifting power, combines a hydraulic bottle jack and jack stand into one device so you can securely lift and leave your vehicle off the ground. With a safety bar that locks the device in place at the proper height, it can be used on both unibody and body-on-frame automobiles.

The height range for the two-ton option is 8-5/8 inches to 18-3/8 inches, while the height range for the three-ton Unijack is 11 inches to 21 inches. This dual-purpose solution may be adjusted to a range of lift positions because it has both concave and flat lifting surfaces. Additionally, they are designed to meet or surpass ASME/PALD standards.

The wide, flat base is one noteworthy feature that increases stability and lessens the possibility of sinking on softer surfaces.

This option works well for typical maintenance tasks like changing your oil or rotating your tires, however it’s not a perfect replacement for a high-quality floor jack. We still advise purchasing a separate floor jack if you’re performing substantial auto repair work. However, this is a great alternative to have in your car in place of the cumbersome scissor jack that came with it.

Pros:

  • Two-in-one bottle jack and jack stand
  • versatile and flexible
  • compact size
  • good height range

Cons:

  • Can’t replace a quality floor jack
  • more parts that can be broken

What to Consider when buying a jack stand?

These are the factors that you should consider while buying a jack stand:

Weight

Any jack stand’s rated weight capacity is its most crucial component, and the user should never go above that limit. The stands are frequently valued in tons as a set. A pair of jack stands, for instance, might be labeled with a 3-ton or 6,000-pound capacity. These stands will each be capable of supporting 3,000 pounds each corner, which is sufficient for the majority of small and mid-size cars. It is better to have too much weight capacity than not enough when employing jack stands. To ensure safety, each stand should, on average, be able to support around 75% of the vehicle’s entire weight.

Height

The majority of jack stands will also include height adjustments, usually with a locking system to maintain the chosen level. When lifting bigger trucks or SUVs, higher maximum settings can be required.

Stability

A stand will frequently be more stable under load if it has a bigger surface area at its foot. When raising automobiles on conditions like mud, plywood sheets can provide a stable basis, but a hard concrete bottom is always preferable. To prevent any wheels on the ground from rolling while the vehicle is being raised, parking brakes and wheel chocks should also be employed.

Best Practices

Always set jack stands beneath the designated lift locations, which are frequently marked along the vehicle’s underside, as specified by the manufacturer. Finding them may also be aided by consulting the owner’s manual. After jacking up each corner of the automobile to the correct height and carefully lowering each one onto the jack supports, position it on a flat, level surface. Continue doing this until all four corners are stable and off the ground. Do everything backwards to lower the automobile.

How reliable are jack stands?

Car jack stands are intended to elevate a weight rather than support it. They lift using hydraulics, and if under constant pressure or poorly maintained, they are prone to failure. One blown seal is all it takes for the entire system to lose pressure, which lowers the load.

Always abide by the following safety advice to lower the chance of jack stand injuries:

  • Whenever you jack up your car, be sure the ground is level and firm. On a slope, never do so, and never on gravel or dirt.
  • The jack that comes with your car should only be used to change a tire. It’s not designed for working underneath your car, but it’s excellent for side-of-the-road emergencies. For that, pick a stronger jack stand.
  • Make sure your jack stand can lift the weight of your vehicle because every jack stand has a weight limit.
  • Never lift a vehicle by placing the jack under the engine, transmission, or any type of plastic under tray; instead, consult the owner’s manual for safe jacking places.
  • Use wheel chocks to prevent the vehicle from rolling after it has been lifted.
  • After it has settled, give it a light shake to make sure it is secure before you crawl underneath.
  • As a secure substitute for jacks or jack stands, think about using car ramps. They offer substantial, unlikely-to-fail points of interaction.

In conclusion

Car jack stands are frequently used for everything from routine auto maintenance to time-consuming tire work. It is a modest but effective gadget that belongs in your garage at home. We covered the top six best jack stands for you in the article.

Can we help you make a decision?

I Chose
0
Helped
0
Could be better
0
Waste of time
0

Comments are closed.

You may also like

More in:Market